Xerox Phaser 6280 User Manual

Printing Custom Size or Long Paper
Phaser® 6280 Printer
84
Using the PostScript Driver
The procedure to print on custom size paper using the PostScript print driver is as follows.
1. From the
File menu, select Print.
2. Select this printer as the printer to be used and click
Preferences or Properties.
3. Select the
Paper/Output tab.
4. From
Paper Size, select Custom Page Size.
5. Specify the length of the short edge and long edge under
Custom Size Settings. You
can specify the values either by entering them directly. The length of the short edge
cannot be longer than the long edge, even if it is within the specified range. The length
of the long edge cannot be shorter than the short edge, even if it is within the specified
range.
6. Click OK twice.
7. Select the appropriate paper tray from
Paper Tray.
8. Select the appropriate paper type from
Paper Type and click OK.
9. Click
Print in the Print dialog box to start printing.
Downloaded From ManualsPrinter.com Manuals

Xerox Phaser 6280 Specifications

General

Brand	Xerox
Model	Phaser 6280
Category	Printer
Language	English