To Next Page

To Previous Page

Windows NT 4.x

Phaser® 6300/6350 Color Laser Printer

4-13

Configuring the Printer

To configure the printer:

1. Insert the Software and Documentation CD-ROM into the computer’s CD-ROM drive, and

then click Have Disk.

2. Click the Browse button and select the directory containing the Windows NT drivers.

3. Select the *.INF file, and then click Open. Verify that the path and filename are correct,

and then click OK.

4. Select the correct printer, and then click OK.

5. Enter a name for the printer, select whether you want that printer to be the default, and

then click OK.

6. Select one of these options:

■ If the printer is not shared, click Next.

■ If the printer is shared, enter a Share Name, check the Share box, and then click Next.

Printing a Test Page

You are prompted to print a test page.

1. Select one of these options:

■ Click Yes to print a test page, and then click Next.

■ Click No if you do not want to print a test page, and then click Next.

2. Select one of these options:

■ Click the Finish button if the data presented is correct. Proceed to Step 3.

■ Click the Back button to correct the data if incorrect, and then click Finish when the

data is correct. Proceed to Step 3.

3. If you printed a test page, you are prompted to confirm that the test page printed:

■ Click Yes if the test page printed successfully.

■ Click No if the test page did not print or printed incorrectly.

Xerox Phaser 6300 Advanced Features Guide

Other manuals for Xerox Phaser 6300