Xerox Phaser 6300 Advanced Features Guide

Macintosh
Phaser® 6300/6350 Color Laser Printer
4-23
Enabling or Using TCP/IP or AppleTalk for Mac OS X, Version
10.2 and Higher
Verify that you are running Mac OS X, version 10.2 or higher. The previous versions of
Mac OS X do not fully support PostScript printing and printer features.
Setting Up the Macintosh Ethernet Port for TCP/IP
To set up your Macintosh for TCP/IP:
1. Select Network from the System Preferences application.
2. Select Built-In Ethernet from the Show menu.
3. Specify how you will obtain the IP address from the TCP/IP tab:
■ Manually: Specify the IP address, Subnet Mask, Router Address, and Name Server
Address in the dialog box.
■ Using DHCP: Automatically finds the IP address.
4. Click Apply, and then close the dialog box.
Setting Up the Macintosh Ethernet Port for AppleTalk
To set up your Macintosh for AppleTalk:
1. Select Network from the System Preferences application.
2. Select Built-In Ethernet from the Show menu.
3. Select Make AppleTalk Active in the AppleTalk tab.
4. Click Apply, and then close the dialog box.

Xerox Phaser 6300 Specifications

General

Brand	Xerox
Model	Phaser 6300
Category	Printer
Language	English