Xerox Phaser 6510 User Manual

6. Using the chart printed in Verifying Paper Registration, select the side for which you want to
adjust registration.
• To adjust side one, navigate to Adjust Side 1, then press OK.
• To adjust side two, navigate to Adjust Side 2, then press OK.
7. Adjust the registration.
• To adjust the side-to-side registration, navigate to Adjust Side Regi, then press OK.
• To adjust the top-to-bottom registration, navigate to Adjust Lead Regi, then press OK.
8. To adjust the image-shift value, use the Up or Down arrow buttons, then press OK.
For reference, position the chart so that Side-1 or Side-2 dots are at the bottom of the page.
• For Lead Registration, a positive value shifts the image down the page.
• For Side Registration, a positive value shifts the image to the left.
9. As required, repeat steps 6 through 8 to enter more values.
10. Print another paper-registration chart, then repeat the process until you complete the registration
corrections.
11. To return the printer to Ready, press Menu.
AAddjjuussttiinngg tthhee VVoollttaaggee OOffffsseett
Use Voltage Offset to specify the bias voltage for printing on the selected paper type. If the printed
image is too light, increase the offset for the paper you are using. If the printed image is mottled or
blotchy-looking, decrease the offset for the paper you are using.
To adjust the voltage offset:
1. At the printer control panel, press Menu.
Note: To navigate through the menu, use the arrow buttons.
2. Navigate to Admin Menu, then press OK.
3. Navigate to Image Quality, then press OK.
4. Navigate to Voltage Offset, then press OK.
5. To select the paper type for the adjustment, press the arrow buttons, then press OK.
6. To increase or decrease the amount of offset, press the arrow buttons, then press OK.
Xerox
®
Phaser
®
6510 Printer
User Guide
111
Maintenance

Xerox Phaser 6510 Specifications

General

Print Technology	Laser
Monthly Duty Cycle	Up to 50, 000 pages
Standard Paper Capacity	250 sheets
Maximum Paper Capacity	850 sheets
Processor Speed	733 MHz
First Page Out (Black)	As fast as 12 seconds
First Page Out (Color)	As fast as 13 seconds
Memory (Standard)	1 GB
Paper Input (Optional)	550-sheet tray
Paper Output	150 sheets
Duplex Printing	Automatic
Printer Type	Color Laser Printer
Paper Capacity	250 sheets standard, 850 sheets maximum
Processor Speed (Higher)	733 MHz
Supported Operating Systems	Windows, macOS, Linux
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0, Ethernet, Wi-Fi
Supported Media Sizes	Letter, Legal, Executive, A4, A5, B5
Connectivity Options	10/100/1000Base-T Ethernet, USB 2.0, Wi-Fi
Paper Input (Standard)	250 sheets
PDL	PCL 6, PostScript 3, PDF, XPS
First Page Out Time	12 seconds black / 13 seconds color
Maximum Paper Size	8.5 x 14 in. / 216 x 356 mm
Memory	1 GB
Memory Capacity	1 GB