Xerox Phaser 6510 User Manual

Power Saver
You can set the time the printer spends idle in ready mode before the printer transitions to a lower
power level. For details, refer to Configuring Power Saver Using the Embedded Web Server.
There are two levels of power-saver mode.
• Low Power Timeout: The printer shifts from Ready mode to Low Power mode to reduce standby
power consumption.
• Sleep Timeout: The printer shifts from Low Power mode to Sleep mode for a greater reduction in
power consumption.
Note: Increasing the default Power Saver activation times can result in an overall higher energy
consumption of the printer.
EExxiittiinngg SSlleeeepp MMooddee
The printer exits Low Power mode or Sleep mode automatically when it receives data from a
connected device.
To exit Low Power mode or Sleep mode manually, at the control panel, press the Power/Wake button.
28
Xerox
®
Phaser
®
6510 Printer
User Guide
Features

Xerox Phaser 6510 Specifications

General

Print Technology	Laser
Monthly Duty Cycle	Up to 50, 000 pages
Standard Paper Capacity	250 sheets
Maximum Paper Capacity	850 sheets
Processor Speed	733 MHz
First Page Out (Black)	As fast as 12 seconds
First Page Out (Color)	As fast as 13 seconds
Memory (Standard)	1 GB
Paper Input (Optional)	550-sheet tray
Paper Output	150 sheets
Duplex Printing	Automatic
Printer Type	Color Laser Printer
Paper Capacity	250 sheets standard, 850 sheets maximum
Processor Speed (Higher)	733 MHz
Supported Operating Systems	Windows, macOS, Linux
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0, Ethernet, Wi-Fi
Supported Media Sizes	Letter, Legal, Executive, A4, A5, B5
Connectivity Options	10/100/1000Base-T Ethernet, USB 2.0, Wi-Fi
Paper Input (Standard)	250 sheets
PDL	PCL 6, PostScript 3, PDF, XPS
First Page Out Time	12 seconds black / 13 seconds color
Maximum Paper Size	8.5 x 14 in. / 216 x 356 mm
Memory	1 GB
Memory Capacity	1 GB