Xerox Phaser 6510 User Manual

Installation and Setup Overview
Before you print, ensure that your computer and the printer are plugged in, powered on, and
connected. Configure the initial settings of the printer, then install the print driver software and
utilities on your computer.
You can connect to your printer directly from your computer using USB, or connect to a network using
an Ethernet cable or wireless connection. Hardware and cabling requirements vary for the different
connection methods. Routers, network hubs and switches, modems, Ethernet cables, and USB cables
are not included with your printer and must be purchased separately. Xerox recommends an Ethernet
connection because it is typically faster than a USB connection, and it provides access to the
Embedded Web Server.
For more information, refer to the System Administrator Guide at www.xerox.com/office/6510docs.
36
Xerox
®
Phaser
®
6510 Printer
User Guide
Installation and Setup

Xerox Phaser 6510 Specifications

General

Print Technology	Laser
Monthly Duty Cycle	Up to 50, 000 pages
Standard Paper Capacity	250 sheets
Maximum Paper Capacity	850 sheets
Processor Speed	733 MHz
First Page Out (Black)	As fast as 12 seconds
First Page Out (Color)	As fast as 13 seconds
Memory (Standard)	1 GB
Paper Input (Optional)	550-sheet tray
Paper Output	150 sheets
Duplex Printing	Automatic
Printer Type	Color Laser Printer
Paper Capacity	250 sheets standard, 850 sheets maximum
Processor Speed (Higher)	733 MHz
Supported Operating Systems	Windows, macOS, Linux
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0, Ethernet, Wi-Fi
Supported Media Sizes	Letter, Legal, Executive, A4, A5, B5
Connectivity Options	10/100/1000Base-T Ethernet, USB 2.0, Wi-Fi
Paper Input (Standard)	250 sheets
PDL	PCL 6, PostScript 3, PDF, XPS
First Page Out Time	12 seconds black / 13 seconds color
Maximum Paper Size	8.5 x 14 in. / 216 x 356 mm
Memory	1 GB
Memory Capacity	1 GB