Xerox Phaser 6510 User Manual

To power off the printer:
1. At the printer control panel, press the Power/Wake button.
Note: If the printer does not respond to a single press of the Power/Wake button,
press and hold the button for 5 seconds. A message appears that requests you to wait
for the printer to power off.
2. Navigate to Power Off, then press OK. Do not plug or unplug the power cord when the printer is
powered on.
Note:
After 10 seconds, the touch screen goes dark and the Power/Wake button flashes until the printer
has completed the power off process.
IInnssttaallllaattiioonn WWiizzaarrdd
The Installation wizard starts the first time you power on the printer. The wizard prompts you with a
series of questions to help you configure basic printer settings.
Note: You can change these settings at any time.
Xerox
®
Phaser
®
6510 Printer
User Guide
49
Installation and Setup

Xerox Phaser 6510 Specifications

General

Brand	Xerox
Model	Phaser 6510
Category	Printer
Language	English