Xerox Phaser 6510 User Manual

Loading Paper
LLooaaddiinngg PPaappeerr iinn tthhee BByyppaassss TTrraayy
1. Open the bypass tray. If the bypass tray is loaded with paper already, remove any paper that is a
different size or type.
2. Pull out the extension tray for larger sizes.
3. Move the width guides to the edges of the tray.
4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you
are ready to use it.
5. Load the paper in the tray. Load hole-punched paper with the holes to the left.
64
Xerox
®
Phaser
®
6510 Printer
User Guide
Paper and Media

Xerox Phaser 6510 Specifications

General

Brand	Xerox
Model	Phaser 6510
Category	Printer
Language	English