Xerox Phaser 6510 User Manual

To perform an engine cleaning procedure:
1. At the printer control panel, press Menu.
Note: To navigate through the menu, use the arrow buttons.
2. Navigate to Admin Menu, then press OK.
3. Navigate to Engine Cleaning, then press OK.
4. At the prompt, press OK.
5. When the process is complete, the printer displays Cleaning is finished.
6. To return the printer to Ready, press Menu.
Xerox
®
Phaser
®
6510 Printer
User Guide
113
Maintenance

Xerox Phaser 6510 Specifications

General

Brand	Xerox
Model	Phaser 6510
Category	Printer
Language	English