8. If the optional 550-Sheet Feeder is installed, unlock, then uninstall it before you move the printer.
9. Lift and carry the printer as shown in the illustration.
Note:
• When moving the printer, do not tilt it more than 10 degrees in any direction.
• Repack the printer and its options using the original packing material and boxes or
a Xerox Repackaging Kit.
Note: Failure to repackage the printer properly for shipment can result in damage not
covered by the Xerox
®
Warranty, Service Agreement, or Total Satisfaction Guarantee.
The Xerox
®
Warranty, Service Agreement, or Total Satisfaction Guarantee do not cover
damage to the printer caused by improper moving.
After moving the printer:
1. Reinstall any parts that you removed.
2. Reconnect the printer to the cables and power cord.
3. Plug in and power on the printer.
Xerox
®
Phaser
®
6510 Printer
User Guide
119
Maintenance
To Next Page
Loading...
