Xerox Phaser 6510 User Manual

4. Close the paper guide on the fuser.
5. Close the rear door.
TTrroouubblleesshhoooottiinngg PPaappeerr JJaammss
MMuullttiippllee SShheeeettss PPuulllleedd TTooggeetthheerr
Probable Causes Solutions
The paper tray is too full. Remove some of the paper. Do not load paper past
fill line.
The edges of the paper are not even. Remove the paper, align the edges, and then reload
it.
The paper is moist from humidity. Remove the paper from the tray, and replace it with
new dry paper.
Too much static electricity is present. Try a new ream of paper.
Using unsupported paper. Use only Xerox
®
-approved paper. For details, refer to
Supported Paper.
136
Xerox
®
Phaser
®
6510 Printer
User Guide
Troubleshooting

Xerox Phaser 6510 Specifications

General

Print Technology	Laser
Monthly Duty Cycle	Up to 50, 000 pages
Standard Paper Capacity	250 sheets
Maximum Paper Capacity	850 sheets
Processor Speed	733 MHz
First Page Out (Black)	As fast as 12 seconds
First Page Out (Color)	As fast as 13 seconds
Memory (Standard)	1 GB
Paper Input (Optional)	550-sheet tray
Paper Output	150 sheets
Duplex Printing	Automatic
Printer Type	Color Laser Printer
Paper Capacity	250 sheets standard, 850 sheets maximum
Processor Speed (Higher)	733 MHz
Supported Operating Systems	Windows, macOS, Linux
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0, Ethernet, Wi-Fi
Supported Media Sizes	Letter, Legal, Executive, A4, A5, B5
Connectivity Options	10/100/1000Base-T Ethernet, USB 2.0, Wi-Fi
Paper Input (Standard)	250 sheets
PDL	PCL 6, PostScript 3, PDF, XPS
First Page Out Time	12 seconds black / 13 seconds color
Maximum Paper Size	8.5 x 14 in. / 216 x 356 mm
Memory	1 GB
Memory Capacity	1 GB