LLooaaddiinngg LLaabbeellss iinn TTrraayy 11
1. To remove the tray from the printer, pull out the tray until it stops, lift the front of the tray slightly,
then pull it out.
2. Adjust the paper length and width guides as illustrated.
3. Load the label-sheets in the tray, face up.
Note: Do not load paper above the maximum fill line. Overfilling can cause paper
jams.
78
Xerox
®
Phaser
®
6510 Printer
User Guide
Paper and Media
To Next Page
Loading...
