2. To remove the bypass tray from the printer, pull the tray straight out of the printer.
3. If the bypass tray is loaded with paper already, remove any paper that is a different size or type. Raise the
paper stop.
4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface. This
procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to use it.
110
Xerox
®
VersaLink
®
B400 Printer User Guide
Paper and Media
To Next Page
Loading...
