2. Adjust the paper length and width guides as shown.
3. Load labels into the tray with the label side face up.
4. Adjust the length and width guides to fit the paper.
5. Slide the tray back into the printer.
6. Push the tray completely back into the printer.
Note:
• If the tray does not go in all the way, ensure that the paper lift plate at the back of the tray is locked
down.
• If the tray is extended for legal-size paper, the tray protrudes when it is inserted into the printer.
7. If the control panel prompts you, verify the size, type, and color on the screen. If you are not prompted, change
the paper settings.
120
Xerox
®
VersaLink
®
B400 Printer User Guide
Paper and Media
To Next Page
Loading...
