Xerox VersaLink B400 - Page 121

a. At the printer control panel, press the HHoommee button.
b. Touch DDeevviiccee >> PPaappeerr TTrraayyss.
c. In the Paper Trays menu, touch the desired tray.
d. To configure the printer to prompt you to set the paper type and size when paper is loaded, touch TTrraayy
MMooddee, then touch FFuullllyy AAddjjuussttaabbllee.
e. To dedicate the tray for a paper size, type, or color, touch TTrraayy MMooddee, then touch DDeeddiiccaatteedd.
• To select a paper or envelope size, touch the current size setting, then select a size.
• To select a paper type, touch the current paper type, then select LLaabbeellss.
• To select a paper color, touch the current paper color, then select a paper color.
f. To save the settings, touch OOKK.
8. To return to the Home screen, press the HHoommee button.
Loading Labels in Tray 1 and the Bypass Tray
1. Remove all paper from the bypass tray.
2. Load Labels in the bypass tray, face up, with the top edge of the page going into the printer first.
3. Adjust the width guides until they touch the edges of the paper.
4. If the control panel prompts you, verify the size, type and color on the screen. If you are not prompted, change
the paper settings.
Xerox
®
VersaLink
®
B400 Printer User Guide 121
Paper and Media