5. To install the Wireless Network Adapter, follow the installation instructions provided with the Wireless Network
Adapter.
CCaauuttiioonn:: Pulling on the adapter can cause damage. After the adapter is installed, remove it only as
needed, and as directed in the Wireless Network Adapter removal instructions. For details, refer to
Removing the Wireless Network Adapter.
6. Power on the printer.
7. Configure the Wi-Fi Settings. For details about configuring the Wi-Fi settings, refer to the System Administrator
Guide at Removing the Wireless Network Adapter.
Removing the Wireless Network Adapter
1. Power off the printer.
Xerox
®
VersaLink
®
B400 Printer User Guide 39
Getting Started
To Next Page
Loading...
