6. Connect the printer to your computer with a USB cable or through the network using an Ethernet cable.
7. Power on the printer.
Note: If the printer was installed previously in a wireless network environment, it could retain setup and
configuration information from that environment. To prevent the printer from attempting to connect to the
previous network, reset the wireless settings. For more information, refer to the System Administrator Guide
at www.xerox.com/support/VLB400docs.
Connecting to a Wi-Fi Network at the Control Panel
To connect to a Wi-Fi network at the control panel:
1. At the printer control panel, press the HHoommee button.
2. Log in as administrator. For details, refer to the System Administrator Guide at www.xerox.com/support/
VLB400docs.
3. Touch DDeevviiccee >> CCoonnnneeccttiivviittyy >> WWii--FFii.
4. To enable the Wi-Fi feature, touch the enable toggle button.
5. To connect automatically to an existing Wi-Fi network:
42
Xerox
®
VersaLink
®
B400 Printer User Guide
Getting Started
To Next Page
Loading...
