4. The control panel displays the Paper Settings.
• To select a new envelope size, touch SSiizzee.
• To select a new paper color, touch CCoolloorr.
Note: When you select an envelope size, the paper type defaults to Envelope.
5. To confirm the settings, touch CCoonnffiirrmm.
LABELS
You can print labels from any tray.
Guidelines for Printing Labels
• Use labels designed for laser printing.
• Do not use vinyl labels.
• Do not feed a sheet of labels through the printer more than once.
• Do not use dry gum labels.
• Print only on one side of the sheet of labels. Use full-sheet labels only.
• Store unused labels flat in their original packaging. Leave the label sheets inside the original packaging until
ready to use. Return any unused label sheets to the original packaging and reseal it.
• Do not store labels in extremely dry or humid conditions or extremely hot or cold conditions. Storing labels in
extreme conditions can cause print-quality problems or cause labels to jam in the printer.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to curl and jam in the
printer.
• In the print driver software, select Label as the paper type.
• Before loading labels, remove all other paper from the tray.
WWaarrnniinngg:: Do not use any sheet where labels are missing, curled, or pulled away from the backing sheet.
It could damage the printer.
Loading Labels in Trays 1 and 2
1. Pull out the tray until it stops.
184 Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide
Paper and Media
To Next Page
Loading...
Need help?
General
