Cloning
Xerox WorkCentre 3315DN/3325DN/3325DNI
System Administrator Guide
42
5. A dialog box will prompt you to specify the name and location for the cloned file. Ensure that the
extension reads .dlm.
Note: You can save the Clone file onto a laptop or PC.
6. Click on Save. The .dlm file can now be used to clone other machines.
Install Clone File to another Device
Note: This procedure will cause the machine to reboot. It will be unavailable over the network for
several minutes.
1. At your Workstation, open the web browser, enter the IP Address of the machine in the Address
bar.
2. Press Enter.
3. Click on the Properties tab.
4. Click on the Machine Settings link.
5. Click on the Cloning link.
6. In the Install Clone File area, click on the Browse button.
If prompted, enter the Administrator User ID admin and Password 1111 and click on Login.
7. Click on the .dlm cloning file located on the laptop or PC.
8. Click on Open.
9. Click on Install to submit the file to the machine.
The machine will not be available over the network for several minutes.
To Next Page
Loading...
Need help?
General
