Xerox WorkCentre 3325DN - Configure the Windows Printer Driver

Configure the Windows Printer Driver
Xerox WorkCentre 3315DN/3325DN/3325DNI
System Administrator Guide
64
Configure the Windows Printer Driver
Manual Print Driver Configuration
To configure the printer driver without using Bi-Directional communication:
Follow the steps below that are specific to your operating system:
1. Select the Windows Start menu.
2. Select one of the following for your Operating System:
3. For:
• Windows 2000, select Settings > Printers.
• Windows XP/2003, select Printers and Faxes.
• Windows 2008/Vista, select Control Panel > Hardware and Sound > Printers.
• Windows 7, select Control Panel > Hardware and Sound > Devices and Printers.
• Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers.
• Windows 7 and Server 2008 R2, from context menus, select the Printer properties.
4. Select the printer icon and then select Preference.
For Windows XP/2003/2008/Vista, select Preference.
5. Select each tab and change any default printer settings as required.
6. Select Apply.
7. Select OK.
For further printing options refer to the WorkCentre 3315DN/3325DN/3325DNI User Guide.
Bi-Directional Support
Follow the steps below that are specific to your operating system:
1. Select the Windows Start menu.
2. Select one of the following for your Operating System:
3. For:
• Windows 2000/2003, select Settings > Printers.
• Windows XP/2008, select Printers and Faxes.
• Windows Vista, select Control Panel > Hardware and Sound > Printers.
• Windows 7, select Control Panel > Hardware and Sound > Devices and Printers.
• Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers.
4. For Windows XP/2003/2008/Vista, select the printer icon and select Properties.
For Windows 7 select Printer Properties.
5. Select the Port tab.