Xerox WorkCentre 4265

Network Connectivity
46 Xerox
®
WorkCentre
®
4265 Multifunction Printer
System Administrator Guide
Configuring the Printer for Open System
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols.
2. Click Wireless Setup.
3. Click Edit Settings.
4. For Network Name SSID, select an option.
5. To refresh the list of available networks, click Refresh.
6. For Security Type, select Open System.
7. For Encryption Type, select an option.
8. For Security Key or Passphrase, type the passphrase.
9. For Address Acquisition, select a protocol option.
10. Click Apply.
Configuring the Printer for Shared Key or WPA/WPA2-Personal
1. Click Wireless Setup.
2. Click Edit Settings.
3. For Network Name SSID, select an option.
4. To refresh the list of available networks, click Refresh.
5. For Security Type, select Shared Key or WPA/WPA2-Personal.
6. For Encryption Type, select an option.
7. For Security Key or Passphrase, type the passphrase.
8. For Address Acquisition, select a protocol option.
9. Click Apply.