Xerox WorkCentre 4265 System Administrator Guide

Copying
90 Xerox
®
WorkCentre
®
4265 Multifunction Printer
System Administrator Guide
Changing the Paper Supply Auto Select Policy at the Control Panel
If Paper Supply Auto Select is set to On, the printer selects the most appropriate size paper tray when
there is no exact match for the copy job. If Paper Supply Auto Select is set to Off, the printer hides the
Auto Select option, and the default paper selection is set to Tray 1.
To set the Paper Supply Auto Select policy:
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
Note: To access this feature at the control panel, log in as an administrator. administrator.
2. Touch Service Settings > Copy > Paper Supply Auto Detect Policy.
3. Select On or Off, then touch OK.
Reducing or Enlarging Presets on the Control Panel
To set the Reduce/Enlarge Presets:
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
Note: To access this feature at the control panel, log in as an administrator. administrator.
2. Touch Service Settings > Copy > Reduce/Enlarge Presets.
3. To reduce or enlarge a preset, touch an existing preset, then touch - or +.
4. To restore the original values, touch Reset All.
5. After you have changed your presets, touch OK.

Xerox WorkCentre 4265 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax, Email
Print Resolution (Max)	Up to 1200 x 1200 dpi
Memory (Standard)	2 GB
Memory (Maximum)	2 GB
Connectivity	10/100/1000Base-T Ethernet, USB 2.0
Paper Output	250 sheets
Scan Resolution (Optical)	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Media Sizes Supported	Legal, Letter
Mobile Printing	Apple AirPrint
Duplex Printing	Automatic
Display	7-inch color touchscreen