Installation and Setup
54 Xerox
®
WorkCentre
®
6025 Multifunction Printer
User Guide
To configure the Host Access List:
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
2. In CentreWare Internet Services, click Properties.
3. In the Properties pane, to expand the menu, click the plus (+) symbol next to the Security folder.
4. Click Host Access List.
5. In the IP Address field, enter the IP address of the host as X.X. X.X, where X is a number from 0
through 255. For example, 192.168.200.10.
6. In the Address Mask field, enter the network mask for the host as X.X. X.X, where X is a number from
0 through 255. For example, 255.255.255.255.
7. For the action the host takes with the IP address, for Active mode, select an option.
− Off: You can use this setting to make a row of the access list inactive. Use this setting to enter a
specific IP address or range of addresses before you apply Accept or Reject mode.
− Accept: You can use this setting to allow the specified IP address or range of addresses access
to the printer.
− Reject: You can use this setting to deny the specified IP address or range of addresses access
to the printer.
8. Click Save Changes.
To Next Page
Loading...
Need help?
General
