HeiTel by Xtralis ipVG Product Guide
29794_00 57
12 ipVG Technical Data
Function Description
Video
Video standard Digital: dependent on IP camera (see HeiTel IP camera compatibility list)
Video compression JPEG, MJPEG, H.264 (with selected IP cameras) as well as
HTcompress
Picture formats Depending on IP camera model: standard to megapixel (5Mpx) resolution
Video inputs Up to 10 IP cameras, simultaneous use of different models and
resolutions
Video Signal monitoring Video signal monitoring
Audio
General Bidirectional audio transmission and recording
Audio compression SPEEX Codec, 16Bit, 80-8000 Hz
Audio inputs 1 x line in (0-2 Vpp, nominal 0.775 Vpp)
or Mic in (electret or electroacustic Micro-phone)
Audio output 1 x line out (0-2 Vpp, nominal 0.775 Vpp)
and 1 speaker out (1W/8 Ohm)
Transmission and Recording
General Video and audio transmission, recording and playback at the same time;
online evaluation via local and remote receiver station
Multi-Unicast Up to 6 IP-connections simultaneously
Web Server Up to 4 IP connections via PC, Smartphone, PDA browser (additional to
5 standard connections)
Video transmission of live and
recorded images
Up to Real-time in total depending on IP connection (LAN, Internet, DSL,
as well as via external additional equipment GPRS, HSDPA, CDMA,
UMTS, EDGE, LTE)
Recording speed Real-time, with IP cameras depending on the resolution
Recording media Internal 2 TB, 4 TB or 6 TB HeiTel HDD
Trigger to initiate transmission/
recording
Dry contact (for first 6 cameras), serial command and timer based
(week) calendar, IntrusionTrace/digital input of selected IP cameras
Privacy Zones Depending on IP camera
Recording modes Image sequence, up to 50,000 events per camera with pre- and post
alarm, continuous recording, all modes in conjunction with built-in timer
based calender
Recording interval Event recording: intervall=0-999s and duration=1-999s separately
adjustable for pre- and post alarm;
continuous recording: intervall=0-999s timer controlled (event optimised
recording possible) (value “0”= as fast as possible)
Callback Automatic callback to pre-programmed receiver stations with
CamControl software
Remote Access and Evaluation
General features Remote access to live images, recorded images and remote setup-/
maintenance and recording via receiver software
To Next Page
Loading...
General