ipVG Product Guide HeiTel by Xtralis
42 29794_00
9.2 Logfile
Certain logfile entries are system entries and as such beyond the control of the user. Other messages are
optional and must be defined with CamControl LITE or CamControl PRO software with menu Extras in Site
archive. In the table below these messages are marked yes in column Optional. Critical messages are
indirectly connected to the error relay and marked yes in column Error relay.
Column Logfile entry provides the text messages and optional additional information indicated by square
brackets. Additional information date and time apply to all entries. Therefore each Logfile entry starts with
[D&T]. For all other additional information, letters (e.g. [x]) are used, which are explained in column
Description.
Logfile command overview
Logfile entry Description Optional Error
relay
General messages
[D&T], Initialisation
of hard disk drive
Re-formatted storage medium, either triggered by settings
menu feature or by accident in evaluation PC, by deletion or
modification, requiring automatic re-formatting.
no no
[D&T], Power on V,
[x]
Device switched on / restarted. Field [x] indicatesipVG
firmware version number.
no no
[D&T], Power off The device was switched off. This entry is not written to the
file until the device is switched on again.
no no
[D&T], Logfile
cleared, [x], [y]
Logfile was deleted by feature Delete logfile in menu settings
Site archive. Field [x] displays name of registered user, field
[y] displays order of login (0=first, 1=second, etc.).
no no
[D&T], Setup
changed, [x], [y]
Device configuration was changed, or menu settings was
closed by OK and not by Cancel. Field [x] displays name of
registered user, field [y] displays order of login (0=first,
1=second, etc.).
no no
[D&T], Files
renamed, [x], [y]
File names on a storage medium from another device were
renamed. The previous serial number [x] can be used to
determine in which device the storage medium was used. [y]
is the serial number of the new device, responsible for
renaming.
no no
[D&T], Set clock Time for ipVG was reset. no no
[D&T], Update, [x],
[y]
ipVG was updated with new firmware. The old version
number is displayed in field [x], the new version number in
field [y].
no no
[D&T], Track, [x],
initialized, [y]
Camera track [x] was initialized. Field [y] indicates whether
this camera track has been divided into partitions for
continuous and/or event triggered recording.
no no
[D&T], Track, [x],
deleted, [y]
Camera track [x] was deleted. Field [y] indicates whether
this camera track has been divided into partitions for
continuous and/or event triggered recording.
no no
[D&T], Password
disabled
The reset pushbutton on the front deletes all user names and
passwords.
no no
[D&T], Alarm
enabled
The video system was armed manually or by the software. no no