HeiTel by Xtralis ipVG Product Guide
29794_00 7
1 Scope
This guide provides information on all features of ipVG. A step-by-step walkthrough will acquaint you with the
transmission and recording features. All you need is ipVG and a PC or laptop with CamControl LITE or
CamControl PRO software.
Version creation date
This guide describes ipVG version 4.58. It was compiled in February 2017. As part of continuous product
development ipVG firmware is in the process of perpetual enhancement. See the installation CD or our
website www.heitel.com for the current firmware version.
Supplementary Guides
Perform setup conveniently with CamControl LITE or CamControl PRO software. Please read the notes on
setup in the respective software guide. The description of offline hard disk evaluation by PC is included in
software guide CamControl PLAYER software. The software guides are available on the installation CD in
several languages and as a PDF file (online documentation).
Connection options for cameras
The ipVG can be equipped with up to a maximum of 10 IP cameras. Up to 8 IntrusionTrace licenses can be
installed for 8 of 10 inputs. However, IntrusionTrace is only available in combination with JPEG/MJPEG
cameras (not H.264).
XOh
The remotely programmable XOh SecurityPlus firmware extends the rich functionality of HeiTel
VideoGateways. The firmware includes additional applications (IntrusionTrace) that supports human guards
and ensures improved, more comprehensive and “always on” threat detection. Moreover, the XOh Firmware
offers full downward compatibility with all existing HeiTel control room applications.
Ordering Information
ipVG (2TB) 4540
ipVG (4TB) 4541
ipVG (6TB) 4542
To Next Page
Loading...
General