HeiTel by Xtralis ipVG Product Guide
29794_00 43
Logfile entry Description Optional Error
relay
[D&T], Alarm
disabled
The video system was disarmed manually or by the
software.
no no
Critical messages
[D&T], Track, [x],
reached warning
threshold
Overwrite protection is activated, the percentile warning
threshold has been reached for a camera track [x].
no yes
[D&T], Hard disk full,
Track, [x]
Overwrite protection is activated and the storage medium
capacity for camera track [x] is depleted; no more pictures
can be recorded.
no yes
[D&T], Period of
recording reached,
Track, [x]
The minimum recording period for camera track [x] can no
longer be maintained.
no yes
[D&T], No video
signal on input, [x]
This message is written for detected video signal errors for
video input [x].
yes yes
[D&T], HDD Read
Error, [x]
Storage medium read error. Field [x] indicates hard disk
model.
no yes
[D&T], HDD Write
Error, [x]
Storage medium write error. Field [x] indicates model of
storage medium.
no yes
[D&T], Hardware
error, [x]
Indicates a serious hardware problem. Field [x] classifies the
error. Text display is as follows:
l Clock = Timer module
l Clear Flash = Faulty flash memory
l Write Flash = Faulty flash memory
l DSP = Faulty DSP module
l DSP-RAM = Faulty DSP memory
l Shared memory = Faulty memory module
The device requires repair.
no yes
[D&T], No secure
code, can't store
pictures
The hard disks are configured specifically for operation with
ipVG by the manufacturer. The device cannot be operated
with standard hard disks.
no yes
[D&T], Temperature
very high
Critical temperatures of at least 70°C were observed inside
the device.
no yes
[D&T], Clock
adjusted
The clock could not be read at startup. The firmware date of
manufacture has been set. This may indicate a faulty battery.
no yes
[D&T], Videodecoder
[x] error
The video decoder has been checked at startup. This
message indicates a faulty video decoder at video input [x].
no yes
Connection messages
To Next Page
Loading...
General