ipVG Product Guide HeiTel by Xtralis
44 29794_00
Logfile entry Description Optional Error
relay
[D&T], Alarmcall
failed: [x], AR: [y]
Alarm connection to receiver with telephone number/ IP
address indicated in field [x] could not be established. Field
[y] indicates the alarm reason (AR):
Possible values for [y]:
Control input, camera 1 - 10: 01 - 10
Sabotage alarm - general alarm input: 11
Sabotage alarm - enable/disable status
input:
12
Sabotage alarm - sabotage-status input: 13
General alarm: 17
Panic alarm (Tamper): 24
Device reboot (Power on): 25
Motion alarm, camera 1 - 10: 31 - 40
Video loss, camera 1 - 10: 41 - 50
Alarm released by serial command, camera
1 - 10:
51 - 60
Camera position authentication, camera 1 -
10:
71 - 80
Alarm panel triggered alarm camera 1 - 10: 81 - 90
Alarm triggered by picture warning threshold
(disk full) for event recording camera 1 - 10:
91 - 100
Alarm triggered by picture warning threshold
(disk full) for continuous recording camera
1 - 10:
101 - 110
Tamper alarm camera 1 - 10: 111 -120
PIR alarm camera 1 - 10: 121 - 130
Tamper alarm (PIR) camera 1 - 10: 131 - 140
IntrusionTrace alarm camera 1 - 10: 141 - 150
no yes
[D&T], Caller, [x], [y] Caller indicates the log in the order of the last login (0=one,
1=two etc.). Field [x] and field [y] indicates telephone number
/ IP address.
yes no
[D&T], Service Call,
[x]
The device triggered a service call to telephone number / IP
Address in field [x].
no no
To Next Page
Loading...
General