Yamaha ERCX Series User Manual

10-13
10
OTHER OPERATIONS
10-5 System utilities
10-5 System utilities
10-5-1 Viewing hidden parameters
Parameters hidden in the normal state can be viewed.
Use extra caution to avoid accidentally changing the parameters when these hidden parameters are
displayed.
1) On the initial screen, press
F3
(SYS).
[MENU]
select menu
1EDIT2OPRT3SYS 4MON
[SYS]
select menu
1SAFE2OPT 3UTL 4next
[SYS-UTL]
select menu
1HDPR
[SYS-UTL-HDPR]
hidden parameter
displayed ?
1yes 2no
[SYS-UTL]
select menu
1HDPR
2) Press
F4
(next) to change the menu display
and then press
F3
(UTL).
3) Press
F1
(HDPR) here.
4) A confirmation message appears.
To permit display of the hidden parameters,
press
F1
(yes)
To hide the hidden parameters, press
F2
(no).
5) The screen returns to step 3.
Display of hidden parameters is permitted un-
til you press
F1
(HDPR) and then
F2
(no),
or the ERCX controller is turned off, or until
the TPB is disconnected.
n
NOTE
The hidden parameter display is also permitted by turning on the power to the controller while holding down the
ESC
key on the TPB, or by connecting the TPB to the controller while holding down the
ESC
key.

Yamaha ERCX Series Specifications

General

Brand	Yamaha
Model	ERCX Series
Category	Controller
Language	English