Yamaha ERCX Series User Manual

10-18
10
OTHER OPERATIONS
10-6 Using a Memory Card
10-6-3 Formatting a memory card
1) Insert the memory card into the TPB.
2) On the initial screen, press
F3
(SYS).
[MENU]
select menu
1EDIT2OPRT3SYS 4MON
[SYS]
select menu
1PRM 2B.UP3INIT
[SYS-B.UP]
select menu
1SAVE2LOAD3FMT 4ID
[SYS-B.UP]
format OK ?
1yes 2no
[SYS-B.UP]
select format type
1normal2compati
[SYS-B.UP]
formatting
[SYS-B.UP]
select menu
1SAVE2LOAD3FMT 4ID
3) Next, press
F2
(B.UP).
4) Press
F3
(FMT).
5) A confirmation message appears.
To format the memory card, press
F1
(yes).
To cancel, press
F2
(no).
6) Select the format type.
To perform the ERCX standard formatting,
press
F1
(normal).
To perform the SRC/SRCA compatible format-
ting, the press
F2
(compati).
7) This screen is displayed while the memory card
is being formatted.
8) When formatting is complete, the screen returns
to step 4.
c
CAUTION
Never eject the memory card during formatting.
Do not leave the memory card inserted into the TPB when not in use. This shortens the backup battery life.

Yamaha ERCX Series Specifications

General

Brand	Yamaha
Model	ERCX Series
Category	Controller
Language	English