Yamaha ERCX Series User Manual

3-23
3
I/O INTERFACE
3-7 I/O Assignment Change Function
3-7 I/O Assignment Change Function
3-7-1 Changing the I/O assignment
The function assigned to each I/O signal can be changed with PRM59 (I/O assignment selection
parameter) setting. Refer to the table on next page when you want to change the I/O assignment.
After changing the I/O assignment, the ERCX controller must be restarted to enable the changes.
n
NOTE
The I/O assignment change function is available on controllers whose version is 13.57 or later.

Yamaha ERCX Series Specifications

General

Brand	Yamaha
Model	ERCX Series
Category	Controller
Language	English