Yamaha MODX7 - Page 128

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MODX Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Ins Assign
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
Copy or Exchange
Elements
128
Reference
 When “EQ Type” is set to “2-band”
EQ Low Gain (Element EQ Low Gain)
Determines the level gain of the Low band.
Settings: -12dB – +12dB
EQ Hi Gain (Element EQ High Gain)
Determines the level gain of the High band.
Settings: -12dB – +12dB
EQ Low Freq (Element EQ Low Frequency)
Determines the frequency for the Low band.
Settings: 50.1Hz–2.00kHz
EQ Hi Freq (Element EQ High Frequency)
Determines the frequency for the High band.
Settings: 139.7Hz–12.9kHz
–
+
0
Low Freq
Settings: 50.1Hz–2.00kHz
Gain
Frequency
High Freq
Settings: 139.7Hz–12.9kHz
Low Gain
Settings: -12dB – +12dB
High Gain
Settings: -12dB – +12dB