Yamaha MODX7 User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MODX Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Ins Assign
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
Copy or Exchange
Elements
73
Reference
From the Zone Transmit display you can set how each individual zone affects transmission of various MIDI
data, such as Control Change and Program Change messages. When the relevant parameter is set to
“on,” playing the selected zone will transmit the corresponding MIDI data.
All settings made in this display are not available when “Transmit Ch” is set to “Off” in the Zone Setting
display.
To activate this display, select [UTILITY]  [Settings]  [Advanced], then set “Zone Master” to “ON.”
For details, refer to the Owner’s Manual.
Pgm Change (Transmit Program Change)
Determines whether Program Change messages are transmitted to the external tone generator or not.
Settings: Off, On
Bank Select (Transmit Bank Select)
Determines whether Bank Select MSB/LSB messages are transmitted to the external tone generator or not.
This is not available when the Transmit Control Change is set to off.
Settings: Off, On
Pitch Bend (Transmit Pitch Bend)
Determines whether Pitch Bend messages are transmitted to the external tone generator or not.
Settings: Off, On
CC (Transmit Control Change)
Determines whether Control Change messages are transmitted to the external tone generator or not.
Settings: Off, On
Vol/Exp (Transmit Volume/Expression)
Determines whether volume messages are transmitted to the external tone generator or not.
This is not available when the Transmit Control Change is set to off.
Settings: Off, On
Pan (Transmit Pan)
Determines whether Pan messages are transmitted to the external tone generator or not.
This is not available when the Transmit Control Change is set to off.
Settings: Off, On
Zone Transmit
Operation
[PERFORMANCE (HOME)]  [EDIT]  Part selection  Element [Common]  [Part Settings] 
[Zone Transmit]

Yamaha MODX7 Specifications

General

Type	Synthesizer
Arpeggiator	Yes
Audio Outputs	2 x 1/4" (L/Mono, R)
Audio Inputs	2 x 1/4"
MIDI	In/Out/Thru
Keyboard	76 keys, semi-weighted
Sound Engine	AWM2 and FM-X
Polyphony	128 (AWM2) / 64 (FM-X)
Effects	Reverb, Chorus, Master EQ
Display	7-inch color wide-VGA LCD touch screen
Sequencer	16-track
Connectivity	Foot Controller, Foot Switch, MIDI (In/Out), USB
USB	1 x Type B, 1 x Type A
Storage	1 GB internal memory
Presets	Over 2000 Performances