Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MODX Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Ins Assign
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
Copy or Exchange
Elements
77
Reference
Gain (Envelope Follower Gain)
Determines the Input gain of the Input Source set in “Part.”
Settings: -24dB – 0dB – +24dB
Attack (Envelope Follower Attack)
Determines the attack time of the Envelope Follower.
Settings: 1ms–40ms
Release (Envelope Follower Release)
Determines the release time of the Envelope Follower.
Settings: 10ms–680ms
Input Level
Indicates the Input Level of the signal from the Input Source set in “Part.”
Envelope Follower Output
Indicates the Output Level of the Envelope Follower.
Edit
Calls up the Control Assign display for the Destination Part.
From the Insertion Effect A/Insertion Effect B display you can set parameters related to Insertion Effect.
Insertion FX Switch (Insertion Effect Switch)
Determines whether the selected Insertion Effect is active or not.
Settings: Off, On
Ins A (Insertion Effect A)
Ins B (Insertion Effect B)
Operation
[PERFORMANCE (HOME)] [EDIT] Part selection Element [Common] [Effect] [Ins A] /
[Ins B]
Insertion FX Switch
Effect Parameter
To Next Page
Loading...
Need help?
General
