Yamaha MODX7 - Page 139

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MODX Reference Manual
Drum Part Edit
Common
Part Settings
General
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Ins Assign
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Control Assign
Receive SW
Key
Osc / Tune
Filter
Level / Pan
Element EQ
Copying or Exchanging
Drum Keys
139
Reference
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 77).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 78).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 81).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 82).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 85).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 87), except for the
additional parameter below.
Fixed SD/BD
When this parameter is set to On, C1 will be used as the note of the Bass Drum and D1 will be used as the
note of the Snare Drum in Arpeggio playback.
Settings: Off, On
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 88).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 91).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 100), except for the
different setting values in the Destination parameter. For the setting value for “Destination,” see the “Control
List” in the Data List PDF document.
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 105).
Ins A (Insertion Effect A)
Ins B (Insertion Effect B)
EQ (Part Equalizer)
Ins Assign (Insertion Assign)
Arpeggio
Common
Individual
Advanced
Motion Seq (Motion Sequencer)
Common
Lane
Mod/Control (Modulation/Control)
Control Assign
Receive SW (Receive Switch)