Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MODX Reference Manual
Common/Audio Edit
Common/Audio
General
Audio In
Mixing
Routing
Ins A
Ins B
EQ
Motion Seq
Common
Lane
Control
Control Assign
Control Number
Effect
Routing
Variation
Reverb
Master FX
Master EQ
USB Monitor
168
Reference
Breath Ctrl (Breath Controller Control Number)
Determines the Control Change Number received from the external equipment such as a Breath Controller.
Even when the instrument receives MIDI message with the same Control Change Number specified here
from the external equipment, the instrument assumes that the message is generated by operating the
Breath Controller.
Settings: Off, 1–95
Foot Ctrl 1/Foot Ctrl 2
(Foot Controller 1 Control Number/Foot Controller 2 Control Number)
Determines the Control Change Number generated by using a Foot Controller connected to the FOOT
CONTROLLER [1] /[2] jack.
Even when the instrument receives MIDI messages with the same Control Change Number specified here
from the external equipment, the instrument assumes that the message is generated by operating the Foot
Controller.
Settings: Off, 1–95, Super Knob
Assign SW 1/Assign SW 2
(Assignable Switch 1 Control Number/Assignable Switch 2 Control Number)
Determines the Control Change Number generated by using the [ASSIGN 1]/[ASSIGN 2] button
(Assignable Switch 1/2).
Even when the instrument receives MIDI messages with the same Control Change Number specified here
from the external equipment, the instrument assumes that the message is generated by operating the
[ASSIGN 1]/[ASSIGN 2] button (Assignable Switch 1/2.)
Settings: Off, 1–95
MS Hold (Motion Sequencer Hold Control Number)
Determines the Control Change Number generated by using the [MOTION SEQ HOLD] (Motion
Sequencer Hold) button.
Even when the instrument receives MIDI messages with the same Control Change Number specified here
from the external equipment, the instrument assumes that the message is generated by operating the
[MOTION SEQ HOLD] (Motion Sequencer Hold) button.
Settings: Off, 1–95
MS Trigger (Motion Sequencer Trigger Control Number)
Determines the Control Change Number generated by using the [MOTION SEQ TRIGGER] (Motion
Sequencer Trigger) button.
Even when the instrument receives MIDI messages with the same Control Change Number specified here
from the external equipment, the instrument assumes that the message is generated by operating the
[MOTION SEQ TRIGGER] (Motion Sequencer Trigger) button.
Settings: Off, 1–95
Assign Knob 1–8 (Assignable Knob 1–8 Control Number)
Determines the Control Change Number generated by using the Assignable Knob 1–8.
Even when the instrument receives MIDI messages with the same Control Change Number specified here
from the external equipment, the instrument assumes that the message is generated by operating the
Assignable Knob 1–8.
Settings: Off, 1–95
MIDI Settings
Calls up the MIDI I/O display in Utility.
To Next Page
Loading...
