Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MODX Reference Manual
Common/Audio Edit
Common/Audio
General
Audio In
Mixing
Routing
Ins A
Ins B
EQ
Motion Seq
Common
Lane
Control
Control Assign
Control Number
Effect
Routing
Variation
Reverb
Master FX
Master EQ
USB Monitor
174
Reference
Lo Mid Freq (Master EQ Low Mid Frequency)
Determines the frequency for the Master Low Mid band.
Settings: 100Hz–10kHz
Mid Freq (Master EQ Mid Frequency)
Determines the frequency for the Master Mid band.
Settings: 100Hz–10kHz
Hi Mid Freq (Master EQ High Mid Frequency)
Determines the frequency for the Master High Mid band.
Settings: 100Hz–10kHz
High Freq (Master EQ High Frequency)
Determines the frequency for the Master High band.
Settings: 500Hz–16kHz
Low Q (Master EQ Low Q)
Determines the EQ bandwidth of the Master Low band. This is available only when the Master EQ Low
Shape (below) is set to “Peak.”
Settings: 0.1–12.0
Lo Mid Q (Master EQ Low Mid Q)
Determines the EQ bandwidth of the Master Low Mid band.
Settings: 0.1–12.0
Mid Q (Master EQ Mid Q)
Determines the EQ bandwidth of the Master Mid band.
Settings: 0.1–12.0
Hi Mid Q (Master EQ High Mid Q)
Determines the EQ bandwidth of the Master High Mid band.
Settings: 0.1–12.0
High Q (Master EQ High Q)
Determines the EQ bandwidth of the Master High band. This is available only when the Master EQ High
Shape (below) is set to “Peak.”
Settings: 0.1–12.0
Low Shape (Master EQ Low Shape)
High Shape (Master EQ High Shape)
Determines whether the equalizer type used is Shelving or Peaking. The Peaking type attenuates/boosts
the signal at the specified Frequency setting, whereas the Shelving type attenuates/boosts the signal at
frequencies above or below the specified Frequency setting. This parameter is available only for the LOW
and HIGH frequency bands.
Settings: Shelf (Shelving Type), Peak (Peaking Type)
To Next Page
Loading...
Need help?
General
