Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MODX Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Ins Assign
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
Copy or Exchange
Elements
90
Reference
Part Arp Gate Time (Part Arpeggio Gate Time)
Determines how much the Gate Time (length) of the Arpeggio notes is offset from the original value. This is
the offset value for the Gate Time Rate (page 86) of each Arpeggio Select setting.
Settings: 0%–200%
Part Arp Velocity (Part Arpeggio Velocity Rate)
Determines how much the velocity of Arpeggio playback is offset from the original value. This is the offset
value for the Velocity Rate (page 85) of each Arpeggio Select setting.
Settings: 0%–200%
Part Motion Seq Amplitude (Part Motion Sequencer Amplitude)
Determines the Amplitude of the Motion Sequencer for the selected Part.
This is the offset value for the Lane Motion Seq Amplitude (page 93) when “MS FX” is set to on for the
Lane.
Settings: -64 – +63
Part Motion Seq Shape (Part Motion Sequencer Pulse Shape)
Determines the Pulse Shape of the Motion Sequencer for the selected Part.
This is the offset value for the Lane Motion Seq “Step Curve Parameter” (page 94) when “MS FX” is set to
on for the Lane and “Control” is set to on for the parameter.
Settings: -100 – +100
Part Motion Seq Smooth (Part Motion Sequencer Smoothness)
Determines the Smoothness of the Motion Sequencer for the selected Part.
This is the offset value for the Lane Motion Seq Smoothness (page 93) when “MS FX” is set to on for the
Lane.
Settings: -64 – +63
Part Motion Seq Random (Part Motion Sequencer Random)
Determines the Random of the Motion Sequencer for the selected Part. “Random” is the degree to which
the Step Value of the Sequence is randomly changed.
Settings: 0–127
Arp/MS Grid (Arpeggio/Motion Sequencer Grid)
Determines the type of note that serves as the basis for the Quantize or Swing. The parameter value is
displayed in clocks.
For Motion Sequencer, this parameter value is one step length.
Settings: 60 (32nd note), 80 (16th note triplet), 120 (16th note), 160 (8th note triplet), 240 (8th note), 320 (1/4 note triplet),
480 (1/4 note)
To Next Page
Loading...
Need help?
General
