The Functions
Owner’s Manual
71
Reference
Function Setting List
Category Settings Display Range/Settings Description
Volume
Style Volume StyleVol 000–127 Determines the volume of the Style.
Song Volume SongVol 000–127 Determines the volume of the Song.
Overall
Transpose Transpos -12–12 Determines the pitch of the instrument by semitone increments.
Tuning Tuning -100–100 Sets the pitch of the instrument’s sound in 1-cent increments.
Pitch Bend Range PBRange 01–12 Sets the pitch bend range in semitone increments.
Split Point SplitPnt
036–096
(C1–C6)
Determines the highest key for the Split voice and sets the Split
“point”—in other words, the key that separates the Split (lower)
and Main (upper) voices. The Split Point setting and Accompani-
ment Split Point setting are automatically set to the same value.
Touch Sensitivity TouchSns
1(Soft),
2(Medium),
3(Hard)
When Touch Response is on, this determines the sensitivity of the
feature.
Main
Voice
Volume M.Volume 000–127 Determines the volume of the Main voice.
Octave M.Octave -2–+2 Determines the octave range for the Main voice.
Pan M.Pan
000 (left)–
64 (center)–
127 (right)
Determines the pan position of the Main voice in the stereo image.
The value “0” results in the sound being panned full left; the value
“127” results in the sound being panned full right.
Reverb Level M.Reverb 000–127
Determines how much of the Main voice’s signal is sent to the
Reverb effect.
Chorus Level M.Chorus 000–127
Determines how much of the Main voice’s signal is sent to the
Chorus effect.
Attack Time M.Attack 000–127 Sets the Main voice attack time.
Release Time M.Releas 000–127 Sets the Main voice release time.
Filter Cutoff M.Cutoff 000–127 Sets the Main voice filter cutoff frequency.
Filter Resonance M.Reso. 000–127 Sets the Main voice filter resonance.
Dual Voice
Voice D.Voice 001–700 Selects the Dual voice.
Volume D.Volume 000–127 Determines the volume of the Dual voice.
Octave D.Octave -2–+2 Determines the octave range for the Dual voice.
Pan D.Pan
000 (left)–
64 (center)–
127 (right)
Determines the pan position of the Dual voice in the stereo image.
The value “0” results in the sound being panned full left; the value
“127” results in the sound being panned full right.
Reverb Level D.Reverb 000–127
Determines how much of the Dual voice’s signal is sent to the
Reverb effect.
Chorus Level D.Chorus 000–127
Determines how much of the Dual voice’s signal is sent to the
Chorus effect.
Attack Time D.Attack 000–127 Sets the Dual voice attack time.
Release Time D.Releas
000–127 Sets the Dual voice release time.
F
ilter Cutoff D.Cutoff 000–127 Sets the Dual voice filter cutoff frequency.
Filter Resonance D.Reso. 000–127 Sets the Dual voice filter resonance.
Split Voice
Voice S.Voice 001–700 Selects the Split voice.
Volume S.Volume 000–127 Determines the volume of the Split voice.
Octave S.Octave -2–+2 Determines the octave range for the Split voice.
Pan S.Pan
000 (left)–
64 (center)–
127 (right)
Determines the pan position of the Split voice in the stereo image.
The value “0” results in the sound being panned full left; the value
“127” results in the sound being panned full right.
Reverb Level S.Reverb 000–127
Determines how much of the Split voice’s signal is sent to the
Reverb effect.
Chorus Level S.Chorus 000–127
Determines how much of the Split voice’s signal is sent to the Cho-
rus effect.
Effect
Reverb Type Reverb 01–10 Determines the Reverb type, including off (10).
Chorus Type Chorus 01–05 Determines the Chorus type, including off (05).
Master EQ Type MasterEQ
Speaker1,
Speaker2,
Headphone,
Line Out1,
Line Out2
Sets the equalizer applied to the speaker output for optimum
sound in different listening situations.
To Next Page
Loading...
