Yamaha TF3 - FX Screen (FX1;2, ins FX1-6)

Main display area
User Guide
TF Editor
- 43 -
FX screen (FX1/2, INS FX1–6)
Allows you select an effect and edit its parameters.
1 Send button
Determines whether a signal is sent (on) or not sent (off) to the FX return channel.
Displayed for CH 1-40, ST IN 1 and ST IN 2.
2 EFFECT TYPE button
Displays the EFFECT TYPE screen, where you can select an effect type.
3 Effect type and name
Displays the type and name of the current effect.
4 R Safe (recall safe) indicator
Displays the recall safe status of the effects module.
Displays the RECALL SAFE screen. (page 20)
5 M safe (mute safe) button
Turns mute safe on and off for the effects module.
6 FX send level slider
Allows you to adjust the amount of channel's signal sent to the effects module.
Displayed for CH 1-40, ST IN 1 and ST IN 2.
7 Pre button
Allows you to select whether the pre-fader or post-fader signal is processed by the effect module.
On: Before the fader
Off: After the fader
Displayed for CH 1-40, ST IN 1 and ST IN 2.
8 Parameter selection buttons
Touch to display other parameters available for the current effect.
9 Parameter sliders
Allow you to adjust the parameters available for the current effect.
0 Sync button
Displayed for effects that have a tempo setting, such as delays.
A Bypass button
Allows you to bypass the effects module.
B Effects output level meter
Displays the output level of the effects module.
C CUE button
Turns cue on and off for the effects module.
ձղ ճ մ ջ
պյ
ռ
ս
չոնշ