Yamaha TF3 - Effect Parameters

Main display area
User Guide
TF Editor
- 45 -
Effect parameters
REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATE
One-input, two-output hall, room, stage, and plate reverbs.
Cannot be used for INS FX 3–6.
MONO DELAY
One-input, two-output basic repeating-type delay.
STEREO DELAY
Two-input, two-output basic stereo delay.
DELAY LCR
One-input, two-output 3-tap delay.
Parameter Range Description
Reverb Time 0.3s–20.0s Determines the length of the reverberation.
Initial Delay 1.0ms–500.0ms Determines the amount of time that passes before the initial reverberation is heard.
High Ratio 0.1–1.0 Ratio of high frequency reverberations to the Reverb Time.
Diffusion 0–10 Left and right spread of the reverberation.
Density 0% – 100% Density of the reverberation.
HPF Thru, 21.2Hz–8.00kHz High-pass filter cutoff frequency.
LPF 50.0Hz–16.0kHz, Thru Low-pass filter cutoff frequency.
Parameter Range Description
Delay 1.0ms–2700.0ms Delay time.
Feedback Gain -99 – +99 Amount of feedback.
High Ratio 0.1–1.0 Amount of high-frequency feedback.
HPF Thru, 21.2Hz–8.00kHz High-pass filter cutoff frequency.
LPF 50.0Hz–16.0kHz, Thru Low-pass filter cutoff frequency.
Sync Off, On Delay time tempo sync.
Note ----, – Value used to calculate the delay time based on the tempo.
Parameter Range Description
Delay L 1.0ms–1350.0ms Left channel delay time.
Delay R 1.0ms–1350.0ms Right channel delay time.
Feedback Gain L -99 – +99 Left channel feedback gain.
Feedback Gain R -99 – +99 Right channel feedback gain.
High Ratio 0.1–1.0 Amount of high-frequency feedback.
HPF Thru, 21.2Hz–8.00kHz High-pass filter cutoff frequency.
LPF 50.0Hz–16.0kHz, Thru Low-pass filter cutoff frequency.
Sync Off, On Delay time tempo sync.
Note L ----, – Value used to calculate the left channel delay time based on the tempo.
Note R ----, – Value used to calculate the right channel delay time based on the tempo.
Parameter Range Description
Delay L 1.0ms–2700.0ms Left channel delay time.
Delay C 1.0ms–2700.0ms Center channel delay time.
Delay R 1.0ms–2700.0ms Right channel delay time.
Delay FB 1.0ms–2700.0ms Feedback delay time.
Feedback Gain -99 – +99 Amount of feedback.
High Ratio 0.1 – 1.0 Amount of high-frequency feedback.
HPF Thru, 21.2Hz–8.00kHz High-pass filter cutoff frequency.
LPF 50.0Hz–16.0kHz, Thru Low-pass filter cutoff frequency.
Level L -100 – +100 Left channel level.
Level C -100 – +100 Center channel level.
Level R -100 – +100 Right channel level.
Sync Off, On Delay time tempo sync.
Note L ----, – Value used to calculate the left channel delay time based on the tempo.
Note C ----, – Value used to calculate the center channel delay time based on the tempo.
Note R ----, – Value used to calculate the right channel delay time based on the tempo.
Note FB ----, – Value used to calculate the delay feedback time based on the tempo.