Yanmar EF-494T - Page 154

5 TRANSMISSION 5 TRANSMISSION
EF494T TM 06/2011 edition
146
(8) Remove the four M8x25 bolts that secure
the bearing retainer (C) on the counter
shaft (D).
Note:
The bearing retainer can only be mounted in the
position shown in the photo.
(9) Remove the bearing retainer (A) using a
coupler.
(10) The parts shown in the photo can be taken
out from the center case side of the counter
shaft.
Note:
The counter shaft cannot be taken out through
the back without removing the differential lock
shaft.