Yardistry YM12978 - Step 26: Attach Twist Brackets

56 support@yardistrystructures.com
A: Measure 3-3/4” (9.53 cm) down from the inside of each post, place bottom of either 45° Twist Bracket LT or 45°
Twist Bracket RT at measured location then attach to post and Corner Rafter (Left or Right) with four #12 x 1-1/2”
Pan Screws per bracket. (F26.1 and F26.2)
Step 26: Attach Twist Brackets
Components:
2 x 45° Twist Bracket LT
2 x 45° Twist Bracket RT
45° Twist
Bracket
(LT/RT)
#12 x 1-1/2”
Pan Screw
Hardware
16 x #12 x 1-1/2” Pan Screw
F26.1
Post
3-3/4”
#12 x 1-1/2”
Pan Screw
F26.2
Rafter Corner
(Left or Right)
9.53 cm
Note: Twist Brackets will
bend when attaching, this
is normal so they sit tight
against rafters and posts.