Appendix B: Installation Conditions for EMC Directives
61
Appendix B: Installation Conditions for EMC Directives
The following conditions must be satisfied to adapt a combination SGM□H servomotor and an
SGDG digital torque amplifier to EMC directives (EN55011-2 and EN61000-6-2).
■ EMC Installation Conditions
This section describes the installation conditions that satisfy EMC guidelines for each
model of the SGDG digital torque amplifier. Also, it describes the EMC installation
conditions satisfied under test conditions prepared by Yaskawa. The actual EMC level
may differ depending on actual system configuration, wiring, and other conditions.
To Next Page
Loading...
