2.8 Communications with an OMRON PLC (FINS Communications Service)
Using Automatic Reception with the MP3000 as a Slave
2-192
8. Select the Enable Option in the Automatically Reception Tab Page and then click the OK Button.
Note: Refer to the following section for details on automatic reception.
2.2 Detail Definition Setting Procedures (page 2-6)
The setting in the Node Address Box on the Other Tab Page will contain the value that is set in the Mes-
sage Communication Easy Setting Dialog Box.
Note: Specify a node address that is not in use by any other device on the same network.
To Next Page
Loading...
