3.2 Function Modules
3.2.7 File Transfer
3-93
3
CPU Module Functionality
Details on the FTP Server Details Dialog Box
The contents of the FTP Server Details Dialog Box are described in the following table.
No. Item Description Remarks
Use PASV mode Specify whether to use PASV mode.
If PASV mode is not specified, ACTIV
mode is used.
Port Number
1 to 65535
This setting is valid in PASV mode.
Port 21 is always used for ACTIV
mode.
Keep login Specify whether to stay logged in.
If you do not specify staying logged
in, the FTP client will be logged out
each time a file is uploaded.
Logout time
1 to 60
This setting is valid only when you
specify staying logged in. The FTP cli-
ent will be logged out if this time
elapses before the next operation is
performed after the last log file is trans-
ferred.
The FTP client will also be logged out
for FTP transfer errors or if the CPU
Module stops regardless of the logout
time setting.
FTP Server IP
Enter the IP address of the FTP server.
The setting range is determined by the
IP address rules for the 218IFD.
The 218IFD settings are used for the
gateway IP address and subnet
mask.
User Name
Enter the login name for the FTP
server.
1 to 32 characters
There are no restrictions to the char-
acters that can be used.
Password
Enter the login password for the FTP
server.
0 to 32 characters
There are no restrictions to the char-
acters that can be used.
Directory Path
Set the directory path to which to write
data in the FTP server.
0 to 64 characters
There are no restrictions to the char-
acters that can be used.
Use slashes to separate directories.
The file name that is specified for log-
ging is used as the name of the file
that is written.
OK Button
Click the OK Button to apply the
changes and end.
−
Cancel Button
Click the Cancel Button to not apply
the changes and end.
−
To Next Page
Loading...
Need help?
General
