3.2 Function Modules
3.2.10 Maintenance Monitoring
3-98
Select the data update period.
3.
Click the Allocate Axis Button.
The Axis Selection Dialog Box will be displayed.
Rush current preven-
tion circuit lifetime
The maintenance period of the inrush prevention
relay is displayed as a percentage. When usage
is first started, 100% is displayed. The percent-
age become smaller as the operating time
increases. When 0% is displayed, it is time to
consider replacement.
SERVO-
PACK
1 0.01%
Dynamic brake circuit
lifetime
The maintenance period of the IGBT is dis-
played as a percentage. When usage is first
started, 100% is displayed. The percentage
become smaller as the operating time increases.
When 0% is displayed, it is time to consider
replacement.
SERVO-
PACK
1 0.01%
Controller installation
environment
The temperature environment load status in the
Controller is displayed.
Control-
ler
11%
You can select the same monitor item for more than one group.
Selection Meaning
Frequent The data is updated approximately once every second.
Regular The data is updated approximately once every 10 seconds.
Infrequent The data is updated approximately once every 100 seconds.
The data update periods are guidelines. The update periods may be increased depending on the
number of monitored axes.
Continued from previous page.
Selection Contents
Moni-
tored
Device
Num-
ber of
Words
Unit
To Next Page
Loading...
Need help?
General
