7.4 Selecting Cables
7.4.2 Servomotor Main Circuit Cables
7-24
*1. Use Flexible Cables for moving parts of machines, such as robots. The recommended bending radius of the
Flexible Cables are given in the following table.
*2. Refer to the following section for the flange specifications.
7.1 Model Designations on page 7-3
Note: Direct Drive Servomotors are not available with holding brakes.
SGMCS-
M
SGMCS-
N
: 45
: 80
3 m JZSP-USA101-03-E JZSP-USA121-03-E
5 m JZSP-USA101-05-E JZSP-USA121-05-E
10 m JZSP-USA101-10-E JZSP-USA121-10-E
15 m JZSP-USA101-15-E JZSP-USA121-15-E
20 m JZSP-USA101-20-E JZSP-USA121-20-E
3 m JZSP-USA102-03-E JZSP-USA122-03-E
5 m JZSP-USA102-05-E JZSP-USA122-05-E
10 m JZSP-USA102-10-E JZSP-USA122-10-E
15 m JZSP-USA102-15-E JZSP-USA122-15-E
20 m JZSP-USA102-20-E JZSP-USA122-20-E
SGMCS-
M
SGMCS-
N
: 1A
3 m JZSP-USA301-03-E JZSP-USA321-03-E
5 m JZSP-USA301-05-E JZSP-USA321-05-E
10 m JZSP-USA301-10-E JZSP-USA321-10-E
15 m JZSP-USA301-15-E JZSP-USA321-15-E
20 m JZSP-USA301-20-E JZSP-USA321-20-E
3 m JZSP-USA302-03-E JZSP-USA322-03-E
5 m JZSP-USA302-05-E JZSP-USA322-05-E
10 m JZSP-USA302-10-E JZSP-USA322-10-E
15 m JZSP-USA302-15-E JZSP-USA322-15-E
20 m JZSP-USA302-20-E JZSP-USA322-20-E
SGMCS-
M
SGMCS-
N
: 1E
: 2Z
3 m JZSP-USA501-03-E JZSP-USA521-03-E
5 m JZSP-USA501-05-E JZSP-USA521-05-E
10 m JZSP-USA501-10-E JZSP-USA521-10-E
15 m JZSP-USA501-15-E JZSP-USA521-15-E
20 m JZSP-USA501-20-E JZSP-USA521-20-E
3 m JZSP-USA502-03-E JZSP-USA522-03-E
5 m JZSP-USA502-05-E JZSP-USA522-05-E
10 m JZSP-USA502-10-E JZSP-USA522-10-E
15 m JZSP-USA502-15-E JZSP-USA522-15-E
20 m JZSP-USA502-20-E JZSP-USA522-20-E
Order Number
Recommended
Bending Radius (R)
Order Number
Recommended
Bending Radius (R)
JZSP-CSM60-
-E
55 mm min.
JZSP-USA321-
-E
113 mm min.
JZSP-CMN01-
-E JZSP-USA322-
-E
JZSP-USA121-
-E
96 mm min.
JZSP-USA521-
-E
150 mm min.
JZSP-USA122-
-E JZSP-USA522-
-E
Continued from previous page.
Servomotor Model
Length
(L)
Order Number
Appearance
Standard Cable
Flexible Cable
*1
To Next Page
Loading...
