YASKAWA VS-606V7 Series - Software No. Display; Display List

6. Programming Features
147
 Software No. Display
The software number of the Inverter for which constants are stored in
the Digital Operator is displayed.
Example: Displaying Software No. of Inverter for which Constants are
Stored in EEPROM in Digital Operator
* Displays the lower 4 digits of the software version.
 Display List
Explanation Operator Display
• Enable the set-
ting for con-
stants n001 to
n179.
• Press to lit
.
• Press to display
the set value.
• Change the set value to 4
by pressing the or key.
• Press .
(May be a different constant No.)
(Lit)
(May be a different set value.)
(Flashes)
(Lit for one second.)
↓
(The constant No. is displayed.)
• Execute Soft-
ware No. Display
(Sno)* using the
Constant Copy
Function Selec-
tion (n176).
• Change the constant No. to
n176 by pressing the or
key.
• Press to display
the set value.
(Lit)
• Change the set value to Sno
by pressing the or key.
(Lit)
• Press .
(Lit)
(Software version: VSP010013)
• Press or .
(The constant No. is displayed.)
Operator
Display
Description Corrective Action
Lit: Constant copy function selection enabled. -
Lit: READ selected.
Flashes: READ under execution.
-
Lit: Writing (COPY) selected.
Flashes: Writing (COPY) under execution.
-
Lit: VERIFY selected.
Flashes: VERIFY under execution.
-
DSPL
PRGM
ENTER
ENTER
ENTER
ENTER
DSPL
ENTER