17
Jump Frequencies (n083 to n086) - - - - - - - - - - - - - - - - - - - - 76
Continuing Operation Using Automatic Retry Attempts
(n082) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 77
Operating a Coasting Motor without Tripping - - - - - - - - - - - - - 77
Holding Acceleration/Deceleration Temporarily - - - - - - - - - - - 78
Using Frequency Meter or Ammeter (n066) - - - - - - - - - - - - - - 79
Calibrating Frequency Meter or Ammerter (n067)- - - - - - - - - - 80
Using Analog Output (AM-AC) as a Pulse Train Signal Output
(n065) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 80
Reducing Motor Noise or Leakage Current Using Carrier
Frequency Selection (n080)- - - - - - - - - - - - - - - - - - - - - - - - - 83
Operator Stop Key Selection (n007) - - - - - - - - - - - - - - - - - - - 86
Selecting the Stopping Method- - - - - - - - - - - - - - - - - - - - - - - 87
Stopping Method Selection (n005) - - - - - - - - - - - - - - - - - - - - 87
Applying DC Injection Braking - - - - - - - - - - - - - - - - - - - - - - - 88
Building Interface Circuits with External Devices - - - - - - - - - - 90
Using Input Signals - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 90
Using the Multi-function Analog Inputs (n077, n078, n079) - - - 94
Using Output Signals (n057, n058, n059) - - - - - - - - - - - - - - - 97
Setting Frequency by Current Reference Input - - - - - - - - - - - 99
Frequency Reference by Pulse Train Input - - - - - - - - - - - - - 101
Preventing the Motor from Stalling (Current Limit) - - - - - - - - 102
Stall Prevention during Operation - - - - - - - - - - - - - - - - - - - - 104
Decreasing Motor Speed Fluctuation - - - - - - - - - - - - - - - - - 106
Slip Compensation (n002 = 0) - - - - - - - - - - - - - - - - - - - - - - 106
Motor Protection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 107
Motor Overload Detection - - - - - - - - - - - - - - - - - - - - - - - - - 107
Selecting Cooling Fan Operation - - - - - - - - - - - - - - - - - - - - 109
Using MEMOBUS (MODBUS) Communications - - - - - - - - - 109
MEMOBUS (MODBUS) Communications - - - - - - - - - - - - - - 109
Communications specified - - - - - - - - - - - - - - - - - - - - - - - - - 110
Communications Connection Terminal - - - - - - - - - - - - - - - - 110
Setting Constants Necessary for Communication- - - - - - - - - -111
Message Format- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 112
Storing Constants [ENTER Command]
(can be written only.) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 121
Performing Self-test - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 124
To Next Page
Loading...
